Home Defense

In the course of a typical day's gunsmithing, I test fire at least three weapons for such things as inconsistent primer ignition, failure to feed properly, and sear disengagement. With the cost of commercial bullet traps somewhere in the stratosphere, I had no choice but to make my own to keep costs down. My indoor trap, which I use for pistols and rimfire rifles, cost less than $25 to build. Even if you use brand new materials, it should cost less than $100.

The SIS Custom RL came with night sights. The rear unit, windage adjustable via drift, was mounted in a dovetail aligning its rear face precisely with the back of the slide for maximum sight radius. Its forward edge presented a vertical surface reaching about 0.2 inches upwards from the top of the slide. This was to provide a catch point on one’s belt or other edge in case the slide needed to be racked without using two hands. Today’s pistols commonly feature a rear sight with a ramped profile front to back. The ramped profile is much less likely to snag clothing than a tall and sharp sight blade. But if the slide must be racked and the support hand is not available, the operator might wish for the sharp edge of the old-style rear sight. Kimber’s SIS-style rear sight meets this need without the worry of hanging up on the inside of a jacket or shirt.

Representative George Peterson and Senator Richard Moore will be filing emergency legislation to address the Massachusetts firearm licensing crisis in the next few days, says the Gun Owners' Action League (GOAL) in Massachusetts.

Matching the proper weight recoil spring with your ammunition can be a key element to producing consistent slide movement and smooth reliable cycling. With little else to go on, it was fair to assume that the recoil spring installed in this FNP-9 was too heavy.

The SLR-106FR is a U.S.-made AK-74 variant that comes with a magazine, cleaning rod, accessory case, drift pin cleaning jag, bore brush, combination tool, oil bottle, cleaning rod, and a web sling.The SLR-106FR is 922(r) compliant, meaning it contains 10 or fewer foreign-made parts, according to Arsenal documents. Those parts include the major Bulgarian-made items, such as the barrel, receiver, and bolt. To make the gun U.S.-compliant, Arsenal takes a Bulgarian gun and adds six U.S.-made parts: the hammer, trigger, disconnector, buttstock, pistol grip, and handguards.

Smith & Wesson Corp. announced that four new models have been added to the Company’s premier line of M&P® polymer pistols based on the popular Pro Series line of competition ready firearms.

Meeting the FBI-protocol handgun-ammunition terminal-performance test requirements is no small task — especially with a bullet as large as .45 caliber – but Hornady engineers have apparently succeeded.

SIG Sauer, a U.S.-based leading manufacturer of law enforcement and military firearms, is pleased to announce that the Connecticut State Police has selected the SIG SAUER P220 as the agency’s next service firearm.

Despite its wide appeal, the 12-gauge shotgun and the recoil it produces are not for everybody. But we think we’ve found a shotgun that is—the Mossberg 410 Cruiser (No. 50455-3).

As Halloween approaches, the Brownells Zombie Elimination Crew (ZEC) promotion is in full swing. The ZEC is made up of mismatched, post-Apocalyptic characters bent on saving the world from the wrath of the Undead. Their single commonality: absolute preparedness for an outbreak. Their continuing existence is evidence that when fully-equipped, anyone can survive.

Larry Vickers AK Operators Course is slated to run Nov. 17-18 in Gainesville, Florida. Classes run from 8 a.m. to 5:30 p.m. both days and teach AK-specific topics, including safety, stance, zeroing for iron sights and optics, sight alignment and trigger control. Familiarization with the carbine includes field stripping and maintenance. Cost is $550.

Austin Miller, contributing editor for Gun Tests magazine and a contributor to GunReports.com, and video producer J.T. Woodard travel to Tactical Firearms in Katy, Texas, to begin testing a unusual trio of handguns for an upcoming issue of Gun Tests.