Firingline

Reader Walt wonders if laser trainers can be used for air rifle and smallbore programs. Great idea — perhaps one can. Reader Mark says that where he shops, tube-mag shotguns continue to rule.

Readers have had a lot of challenges finding good wheelgun reloading devices. We were happy to help. Also, Reader Gail wonders about the 6.5 PRC, but not so much that a change is in the cards.

I have a Canadian Non-Restricted version of the 9mm Beretta CX4. Barrel Length ~19.5 inches. The Restricted version here is ~16.5 inches. I did not see any mention in the review about needing "No Tools" to field-strip the rifle. When field-stripped, the two main parts are about the same size as the Ruger when taken down. In Canada, the Restricted version comes with a plastic gun case and no front rails, and the Non-Restricted version comes with the front rails and no hard case. The Non-Restricted version is too long to fit into the plastic case. With my big hands, I don't have an issue with the mag release. I bought the CX4 because I already own a Beretta 92A1, and they use the same magazine.

Now once again, this holster is NOT actually designed for the EZ380, but it works great, and is real comfortable to wear. No issues with the holster catching on the mag release. Now, since I really only have one pair of jeans for IWB carry, I still wanted an OWB holster. For this I tried a different local gunshop, closer to home, and they let me try a few "universal" holsters off the shelf. The one they suggested fit the gun okay, but like you, when I pulled the EZ out of the holster, just with my hands, the magazine came flying out! So back on the shelf that model went.

Just finished your article on sub-gauge pumpguns. I have a Mossberg Shockwave in .410 bore and really enjoyed your article. One thing that I have done with mine is to install a blue laser. Mounted on the top of the receiver, it puts the push button directly forward of the safety. Group size with slugs is easily contained in a coffee cup during from-the-hip shooting. Thanks again for your great articles.

I think the Remington R1 Enhanced Threaded Barrel featured in this article may not actually be the same model you tested and referenced in the past. Remington bought up the out-of-business carcass of Para, aka Para Ordnance, and is now selling 1911 versions of that company's models with the same name as the (very good, actually) R1 1911s it has been selling for the last 10 years or so with its own designs.

I really appreciate the heavy 9mm loads article. I don't have the time or resources to buy and test a bunch of loads, even though I am very interested in selecting a load for my 9mm that fits my needs. You guys did all the work for me! I trust your opinions and appreciate your straightforward approach to testing and review. I now have a few options that I can try to see if they work for me personally. Case in point, I recently went on a hiking trip with my 12-year-old son in cougar, bear, and, unfortunately, now wolf country. I had to choose between a high-capacity 9mm and a 5-round 357 Magnum. I went with the magnum for better penetration potential. But after reading your article, I am definitely going to pick up some Buffalo Bore Outdoorsman Hard Cast Lead Flat Nose cartridges and see if I can get the best of both worlds. Thanks for the great magazine and keep up the good work!

I enjoyed your review of the 1873 from Uberti. I agree that the rubber recoil pad is distracting and probably unnecessary. I prefer a traditional brass or steel buttplate, but with checkering or texture. On my 1892, I added a leather pad for texture, but only because I couldn't figure out how to checker it appropriately. If I were doing it again, I think I would use pin punches and stipple it. Keep up the good work and unbiased reviews.

I enjoyed the article on 38 Special lever-action rifles, but I think you missed a very important warning. The 38 Special and 357 Magnum are not interchangeable, for reasons other than the strength of the action. I have a Marlin lever action in 357 caliber. I decided to sight it in with 38 Special rounds and then change to 357 and adjust the sights. After about 20 or 30 rounds of 38 Special, I switched to 357. When I tried to rack in the second round, it wouldn't seat. The problem was that the 38 Special rounds carboned up the chamber, and when the 357 round was extracted, only about half of the cartridge came out. I had to have a gunsmith remove the front half of the casing. I only shoot 357 rounds in my rifle and revolver since then. I have never seen this in any article which discusses using 38 Special ammo in a 357 chamber.

I enjoyed the article on 38 Special lever-action rifles, but I think you missed a very important warning. The 38 Special and 357 Magnum are not interchangeable, for reasons other than the strength of the action. I have a Marlin lever action in 357 caliber. I decided to sight it in with 38 Special rounds and then change to 357 and adjust the sights. After about 20 or 30 rounds of 38 Special, I switched to 357. When I tried to rack in the second round, it wouldn't seat. The problem was that the 38 Special rounds carboned up the chamber, and when the 357 round was extracted, only about half of the cartridge came out. I had to have a gunsmith remove the front half of the casing. I only shoot 357 rounds in my rifle and revolver since then. I have never seen this in any article which discusses using 38 Special ammo in a 357 chamber.

I enjoyed the article on 38 Special lever-action rifles, but I think you missed a very important warning. The 38 Special and 357 Magnum are not interchangeable, for reasons other than the strength of the action. I have a Marlin lever action in 357 caliber. I decided to sight it in with 38 Special rounds and then change to 357 and adjust the sights. After about 20 or 30 rounds of 38 Special, I switched to 357. When I tried to rack in the second round, it wouldn't seat. The problem was that the 38 Special rounds carboned up the chamber, and when the 357 round was extracted, only about half of the cartridge came out. I had to have a gunsmith remove the front half of the casing. I only shoot 357 rounds in my rifle and revolver since then. I have never seen this in any article which discusses using 38 Special ammo in a 357 chamber.