Handguns

Charter Arms recently moved into an expanded office and production facility. The company’s new location increases production space from 8,000 to 28,000 square feet providing a major increase in manufacturing finished goods capacity.<

Changes to Michigan’s concealed weapons law passed the state House last week, allowing gun owners who take additional training classes and who shoot and pass additional qualifying courses to carry their weapons in places such as schools, day care centers, stadiums and churches.

The Colt is the most expensive pistol tested at twice the tariff of some GI pistols. Just the same, the pistol could not be excluded on that factor. The Colt Black Army is a close copy of the original as it was manufactured in 1918.

‘Armageddon Arsenals’ debuted last night on Discovery’s Destination America network. The series explores the weapons and security aspects of the massive new prepping movement, focusing on individuals and families across the country who are preparing for a variety of worst case scenarios–many of them more plausible now than ever.

In the course of a typical day's gunsmithing, I test fire at least three weapons for such things as inconsistent primer ignition, failure to feed properly, and sear disengagement. With the cost of commercial bullet traps somewhere in the stratosphere, I had no choice but to make my own to keep costs down. My indoor trap, which I use for pistols and rimfire rifles, cost less than $25 to build. Even if you use brand new materials, it should cost less than $100.

The SIS Custom RL came with night sights. The rear unit, windage adjustable via drift, was mounted in a dovetail aligning its rear face precisely with the back of the slide for maximum sight radius. Its forward edge presented a vertical surface reaching about 0.2 inches upwards from the top of the slide. This was to provide a catch point on one’s belt or other edge in case the slide needed to be racked without using two hands. Today’s pistols commonly feature a rear sight with a ramped profile front to back. The ramped profile is much less likely to snag clothing than a tall and sharp sight blade. But if the slide must be racked and the support hand is not available, the operator might wish for the sharp edge of the old-style rear sight. Kimber’s SIS-style rear sight meets this need without the worry of hanging up on the inside of a jacket or shirt.

The Llama's firing mechanism differs considerably in detail from the 1911. The slide is the main area of interest. For illustration purposes, I chose a rather common Commander-length Llama in 9mm Luger. This pistol is a true compact, however, rather than a short slide on a full-length frame. The extractor is of the external type. There is no extractor tunnel in the slide and no firing-pin stop. While the elimination of the firing-pin stop and internal extractor may seem a good thing, if the treatment is not of high quality, then we have a problem. I've personally never seen a broken firing pin in a Llama pistol, but my friends in the gun-parts business have sold quite a few. On the other hand, I have repaired numerous extractors. The steel seems quite soft and new replacements are not easy to come by (though Gun Parts Corporation and Bob's Gun Shop are places to start looking). I have recut and reshaped these extractors, sometimes convincing the part to last for a time.

A short while back Gun Tests magazine tested some pretty small 9mm pistols, by Kahr and by Rohrbaugh. They particularly liked the Kahr PM9's handling qualities, and the fact that it worked well as a back-up pistol. They noted Kahr produces a similar pistol in .40 S&W caliber, called the PM40. They decided it was appropriate to try one, because anyone who liked the PM9 would probably welcome more power in a package nearly as small.

Representative George Peterson and Senator Richard Moore will be filing emergency legislation to address the Massachusetts firearm licensing crisis in the next few days, says the Gun Owners' Action League (GOAL) in Massachusetts.

Matching the proper weight recoil spring with your ammunition can be a key element to producing consistent slide movement and smooth reliable cycling. With little else to go on, it was fair to assume that the recoil spring installed in this FNP-9 was too heavy.

There will always be a need to identify chamberings of firearms that have been inherited or bought at yard sales. The lure of buying for bottom dollar and discovering a real jewel is ingrained in most of us, so a little thing like no chambering marks on a rifle or handgun is no deterrent to a gun fancier.

The International Defensive Pistol Association (IDPA) announced that O.F. Mossberg & Sons, Inc., will be one of the major sponsors of the Smith & Wesson IDPA Indoor National Championship. The 2013 Smith & Wesson IDPA Indoor National Championship will take place February 21-23 on the indoor ranges of the Smith & Wesson Shooting Sports Center in Springfield, Massachusetts.